Made to Connect.
QUALITY ASSURANCE

Quality Built Into Every Metre

Electrical safety is non-negotiable. At Peraton, quality controls are applied at defined stages from incoming material inspection through in-process checks and final product release.

View Conformance Documents
DEFINED CONTROL STAGES

The Peraton Quality Framework

Quality controls are applied at defined stages from incoming material inspection through in-process checks and final product release.

Stage 01

Incoming Material Inspection

  • Conductor material verification against purchase specifications
  • Polymer compound specific gravity and hardness checks
  • Surface inspection of braiding yarn and taping inputs
  • Verification of supplier certificates of analysis
Stage 02

In-Process Quality Controls

  • Bunching stranding pitch and diameter monitoring
  • Continuous extrusion temperature zone control
  • 100% online high-voltage spark testing during primary insulation
  • Wall thickness and concentricity monitoring
Stage 03

Finished Product Electrical Testing

  • Conductor DC resistance measurement at 20°C reference
  • Insulation resistance verification using high-megohm meters
  • High-voltage immersion proof testing where applicable
  • Core color coding verification and sequential meter print check
Stage 04

Traceability & Batch Documentation

  • Batch number assignment linked to raw material lot references
  • Internal inspection report generation and retention
  • Guaranteed Technical Particulars (GTP) conformance check
  • Pre-dispatch visual inspection and protective wrapping check
TESTING CLASSIFICATION

In-House Routine vs. Periodic Type Testing

We maintain clear operational separation between routine batch release tests and periodic type verification.

ROUTINE BATCH RELEASE

In-House Routine Testing

Performed internally on production batches prior to packaging and dispatch.

  • Conductor DC Resistance Measurement (IS 8130): Measured at reference temperature of 20°C using calibrated micro-ohm resistance instrumentation.
  • Insulation Resistance Measurement (IS 10810 / IS 694): Routine verification of dielectric insulation resistance across production lots.
  • Online High-Voltage Spark Testing (IS 694): 100% continuous online high-voltage spark testing during primary extrusion.
  • Dimensional & Concentricity Verification (IS 694): Optical and micrometer checks of conductor diameter, insulation wall thickness, and outer diameter.
  • Visual Finish & Identification Legibility (Peraton QC Protocol): Inspection of surface smoothness, core color distinctiveness, and meter print legibility.
PERIODIC / TYPE VALIDATION

Periodic & Type Testing

Conducted periodically and during compound formulation qualification to verify flame and material standards.

  • Oxygen Index & Temperature Index (IS 10810 (Part 58 / 64)): Periodic / compound verification for Flame Retardant Low Smoke (FRLS) compounds conducted under laboratory test conditions.
  • Smoke Density Rating Test (IS 10810 (Part 63)): Periodic smoke transmittance testing on compound samples under controlled combustion.
  • Acid Gas Emission Test (IS 10810 (Part 59)): Periodic acid gas generation test on compound samples to verify low corrosive gas release.
  • Flame Retardance Test (IS 10810 (Part 53)): Periodic evaluation of flame propagation and self-extinguishing behavior.

Batch Traceability

Finished production is identified using batch/production references to support traceability of manufacturing and quality records.

Submit Project Requirement

Type to search Peraton cables, standards, GTP specifications, and datasheets.

FRLS Wire IS 694 Control Cable Panel Wire Uninyvin Shielded Cable